AZSlow

AZ Controller plug-in for Cakewalk SONAR => Presets => Topic started by: azslow3 on April 25, 2016, 05:31:43 PM

Title: [AZ] OSC Phone
Post by: azslow3 on April 25, 2016, 05:31:43 PM
Note: AZCtrl v0.5r0b310 or later is required
Note: for preset 1.1 AZCtrl v0.5r4b357 or later is required


YouTube installation and short demonstration video: https://www.youtube.com/watch?v=L5Gl61MvEuQ (https://www.youtube.com/watch?v=L5Gl61MvEuQ)


Functions

Tab One (Strip):
 * sync button to (re)sync with Sonar
 * one strip control, with volume, pan, mute, solo, echo, arm, automation read/write
 * transport control with Markers (buttons), Jogger (measures), Stop/Play/Rec
 * current "Now time" display, color is changed during Play and Record
 * Current strip selection, current strip button toggle between Tracks and Buses (color indication). Selection is synced with the focused track in Sonar (bidirectionally).

Tab Two (Mix):
 * Time/Stop/Play/Rec as in the Tab One
 * 16 channels (WAI indicated in sonar), pressing channel name focus it (in sonar and so for Tab one), Mute/Solo can be "swiped" for fast operations.
 * No separated switch for buses, but switching in the Tab One and Sonar also affect the list
 * Next/Previous bank (long press) or shift to next/previous (short tap) buttons

Tab Three (ACT):
 * current ACT map in focus is displayed, it can be changed in Sonar independent from focused track
 * switching to this Tab from other automatically focus the first FX in the bin
 * FX button round throw all FX effects for focused tracks, including ProChannel modules
 * Synth button focus corresponding to the track Synth
 * Faders / Knobs buttons on the left/right side select corresponding parameter for control by the (only) fader. Current parameter is indicated separately on top of the faders.
 * Bank change buttons show next/previous 8 ACT faders/knobs
 * 8 ACT buttons work directly, with color indication


Tab Four (Send), v1.1:
 * current strip with switches between strips and strip types (as in the Strip tab)
 * transport section (as in the Strip tab)
 * 4 sends from the current strip, including on/off (press target name to switch), pre/post, send volume and pan


Requirements
 * Sonar (any version, tested with X2 and 2016)
 * (i/A)Phone with TouchOSC from http://hexler.net/software/touchosc (http://hexler.net/software/touchosc)
 * AZ Controller (see minimal version on the top)

Installation
 * Close Sonar
 * Install AZ Controller (download required version and run installer)
 * Download attached ".SPP" file
 * Start Sonar
 * From "Utilities" Sonar menu, start "CakeWalk Plug-in Manager", select "Control Surfaces", "AZ Controller", "Import..." and choose SPP file.
 * In Sonar Preferences / Control Surfaces add "AZ Controller" with both Input and Output set to None
 * From Utilities menu, open AZ Controller preferences, select "OSC Phone" preset (top left corder)
 * download attached ".touchosc" file, load it into TouchOSC (see its documentation how to do this)
 * start TouchOSC
 * in the AZCtrl Options Tab, press "Configure" in the "OSC" section. Check "Enabled". Put the ports you see to/from TouchOSC configuration. Put the Host you see into TouchOSC configuration. Press Ok in the AZCtrl OSC configuration dialog (observe "Active, 0 clients").
 * Press Done in TouchOSC. Observer "Active, 1 clients" in the AZCtrl and working preset (with some luck  ;) )
Title: Re: [AZ] OSC Phone, Adding several buttons/functions to TouchOSC
Post by: balinas on February 14, 2017, 08:56:15 PM
Alexey,

I have installed TouchOSC on my phone and can easily connect with Sonar PLT using AZ controller and your OSC-Phone-1-0 layout.  Everything works as you have set up.  I would like to add several buttons at this time.  One for 'UNDO' and one for 'place new marker.'

In TouchOSC editor, I can make the rectangle boxes and add the labels.  I am not sure how to now get TouchOSC to send the correct messages. 

Can you walk me through this step by step?

thanks!

Bart
Title: Re: [AZ] OSC Phone
Post by: azslow3 on February 14, 2017, 10:36:45 PM
Hi Bart,

Nice to know you have decided to give it a try!

In TouchOSC the simplest way to define new button is to copy existing. Let say "Stop" button. It has 2 elements, the button and the label. Copy/paste the button first. In the left side, change the Name to "Undo" (not really important) and "/stop" to "/undo" in the OSC section (that is important). Copy/paste the label then. Also change the name, OSC (to "/undo/label") and the text.

On the AZ Controller side, follow "Quick start" step-by-step tutorial in the Manual section. With the following changes: you start from current OSC preset instead of "blank", during hardware learning, press the button on your phone (you should see "/undo" in the "Last MIDI event") and press "Assign OSC" instead of "Assign MIDI". As the action, you need only one (instead of 2 in the tutorial): "Command" "<Menu>" "Edit | Undo".

In can be a bit hard to define your first button, but once done you will be able to add another one in no time (tip: you can use "Dup." button in the "Options"/"Hardware controls", with your first button selected).

Please do not hesitate to ask if something is still unclear, any questions are welcome.
Title: Re: [AZ] OSC Phone
Post by: balinas on February 15, 2017, 01:39:07 AM
Thanks!  That works well.  I have added a small 'undo' and Marker box.  I will also need to add a small 'enter' to be able to clear the Marker dialogue box.

This will also help with redoing a few of the MCU PRO buttons.

I will play with this for a while and see what else I 'need' when sitting back in the 'isolation' room.

thanks,   -Bart
Title: Re: [AZ] OSC Phone
Post by: balinas on February 15, 2017, 01:42:48 AM
HA!  the time difference was screwing with my head there for a minute!  I was wondering, 'How did he answer me "yesterday" to a post I just did today?!'

Title: Re: [AZ] OSC Phone
Post by: azslow3 on February 15, 2017, 08:07:59 AM
HA!  the time difference was screwing with my head there for a minute!  I was wondering, 'How did he answer me "yesterday" to a post I just did today?!'
:)
That you can try to fix in Profile / Modify Profile / Look an layout / Time offset.
Title: Re: [AZ] OSC Phone
Post by: balinas on February 18, 2017, 10:35:09 PM
I have added an 'UNDO', 'New Marker', and 'Enter' buttons for the TouchOSC.  They work well.  Seems easy to add the simple push button/single command switch.  eventually I would like to add a new page to your template that has an input level monitoring meter and a slider to adjust the input gain.  This is because from where I sit to record, the computer screen gets awfully small and hard to see.  And if the gain needs adjusting, I need to get up, navigate back to the computer, reset the gain, go back to the recording area, then try it out. 

Is this possible?  If eventually it is, what do you suggest that I look at next?

thanks,
Bart
Title: Re: [AZ] OSC Phone
Post by: azslow3 on February 19, 2017, 09:57:27 AM
Touch OSC has no direct support for level indicators, so it is better I create corresponding configuration. Please upload your current preset and I will add 4th page to it (otherwise you will have to redo your buttons).

With gain it depends from what you mean. Sonar track "gain" is digital, probably you want adjust the gain on your audio interface. Which interface you use? Most of them unfortunately have analog gain, but then you can not adjust it on computer as well. If it is MIDI adjustable, we can try to make it work.
Title: Re: [AZ] OSC Phone
Post by: balinas on February 19, 2017, 10:51:08 PM
I am not sure what preset file to send back.  When I look at the preset folder, there are several files: MCU, Quick start, OSC Phone 1.0, and OSC Phone 1.0a.

None of these appear to have the file extension allowed to be sent.  The OSC Phone 1.0a is the saved configuration with the couple of added buttons.

What would i need to do to get this to you?

I understand the difference you describe between the digital gain in Sonar and the analog gain.  I am using a VS-100 for my Audio input.  The recording input meter signal alone would be a help, so that I can see if I am getting signals close to what I want.  I usually adjust the input gain on the VS-100 with the sensitivity knob, but having some ability to even tweak the digital gain in Sonar may help. 

thanks,

Bart
Title: Re: [AZ] OSC Phone
Post by: azslow3 on February 20, 2017, 10:05:22 AM
To save the preset:
1) open AZ Controller interface
2) in the top left corner, enter new name, f.e. "OSC with commands". Press Diskette icon to save it (internally)
3) open Cakewalk Plug-in Manager from Sonar utilities menu. Select "Control Surfaces" / "AZ Controlle" and press "Export"
4) select the file name and select the preset you have saved before in the lower list, press Save.

You can attach resulting .spp file to posts in this forum.
Title: Re: [AZ] OSC Phone
Post by: balinas on February 20, 2017, 02:36:54 PM
Ok.  Here are the files attached.  The one labeled OSC_Phone_1_0a.touchosc is the template changes I made in TouchOSC editor.

thanks. 
Title: Re: [AZ] OSC Phone
Post by: azslow3 on February 21, 2017, 12:07:11 PM
I attach modified version. Please note that you need b356 or later version of AZ Controller (currently the test version, you can find in Downloads).

The implementation is a bit dirty, but should work. As I wrote, TouchOSC has no direct support for level indicators.

Also note that you have created some "orphaned" controls (Detached), I have not cleaned them.

May be we should check either we can digitally control the gain on VS100. On VS20 that is possible.
Title: Re: [AZ] OSC Phone
Post by: balinas on February 21, 2017, 05:17:57 PM
I downloaded the b356 version of AZ controller and installed it.  The control surface dialog for AZ Controller confirms it is the b356 version.

I downloaded the two files in your last post, and brought up the latest TouchOSC template in the editor, and imported the lasted OSC with Commands into the plug in manager. 

The editor confirms the added 4th page.  The AZ Controller dialog box confirms the /gfader changes.  The Gain fader works in increasing/decreasing the digital input gain for the selected track.  The only thing I don't see is any input levels on the meter on the 4 th page of the TouchOSC template. 

The one mechanical slider on the VS-100 is currently response to the 'volume' control of the selected track.  This is probably set somewhere in the preset controller info that is in Sonar, but I don't know how to confirm or change that to having the slider change the input gain.  I know you can make the VS-100 a total ACT surface, but I believe in that mode it can't be used as an audio input device.

Title: Re: [AZ] OSC Phone
Post by: balinas on February 21, 2017, 05:50:44 PM
With the 'gain' input working, I decided to start recording something.  Then all of a sudden the meters on the 4th page start working!  So I will work with this right now.  Not sure why it took a while to start, but it finally has.  I will play with this for a while, and let you know. 

thanks,

bart
Title: Re: [AZ] OSC Phone
Post by: azslow3 on February 21, 2017, 07:29:16 PM
If level it not working, you can "troubleshoot" that.

First of all, that is not "input level". It is the same level as in Sonar, so post fader.
Second, you should "switch" to the 4th page when communication is established. Switching pages is also a signal ("/1", ... "/4"), it set the "Page" state (you can check all states in the "Overview" tab).
Third, check that LvlLED states are changing when you start playback (again on the overview page).
Title: Re: [AZ] OSC Phone
Post by: balinas on February 21, 2017, 08:05:27 PM
Working well. Thanks.  I will probably add a couple of things to that 4 th page.  Duplication!  This is how control surfaces should have worked a while ago!
Let me know when you would like to get your wife flowers again.
Title: Re: [AZ] OSC Phone
Post by: azslow3 on February 21, 2017, 08:53:38 PM
I forgot to add the feature I have in some other presets... Clipping indicator (which stay for a while in case engaged). Also I want to mention that levels here and in Sonar can be tuned in Sonar preferences. Particular colors and "levels" was chosen "randomly". That can be also tuned.

Flowers time will come soon, after we have moved in September, we have small garden outside  ;)
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 28, 2017, 07:32:44 AM
Hello everyone!!
I come from China. My English is not good。
I want to ask some questions.
I use Android phone, download the touchosc.
I want to add some buttons with the Clippers
Want to add a monitor button in the interface
Also want to add a bus to send clippers or delayed shipments such as reverberation
Thank you
Title: Re: [AZ] OSC Phone
Post by: azslow3 on March 28, 2017, 12:17:48 PM
Hello and welcome! 你好

I have not understood what you mean by the "buttons with the Clippers".
I have colleagues in the next office which can translate from Chinese if required. So if you can not explain that in other English words or by pictures, just write in your native language.

I have uploaded a new version (1.1) in the first post of this thread. Note that you need the latest version of AZ Controller to use it (b357).
New version has Echo (Monitor) button and Sends tab.

Please let me know if you spot any problems or need something else.
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 28, 2017, 02:11:44 PM
 :) :)非常感谢您的回复,我下载了1.1版本的,里面新增的功能正是我所需要的,非常感谢 ;) ;) ;) ;)
我有一个1920x1080 11.6寸的Android 平板,请问您有没有打算做一个适合pad用的osc。
因为我想要是osc能在android pad上用的话那是非常酷的一件事
Title: Re: [AZ] OSC Phone
Post by: azslow3 on March 28, 2017, 03:24:54 PM
Thank you for the confirmation it works.

I do not have 1920x1080 device.

If you want, I can modify current phone preset for big screen. I can try to fit all 4 pages into one.
But creating specialized layout with many strips is significant task I am not ready to do right now.

In the mean time you can also try TouchDAW. It is not OSC based and has some limitations with Sonar. But it reasonably covers mixing task.
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 28, 2017, 03:54:58 PM
非常感谢!!我非常期待你能做一个android pad大屏幕的适配,我可以帮你测试。谢谢!
Title: Re: [AZ] OSC Phone
Post by: azslow3 on March 28, 2017, 05:14:25 PM
I understand the layout is not optimal. You can try to use TouchOSC Editor to adjust it.
But as I wrote, adding more controls and developing reasonable layout is outside of my possibilities in the nearest future.

Also I have not found the way to rotate controls in the Editor. So the layout it vertical.
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 28, 2017, 05:40:05 PM
你好!
我现在发现一个新的问题,当我安装好B357版本后,在SONAR里面添加好控制器之后。
右键选择发送到总线,SONAR就会报错关闭。我的操作系统是windows10 SONAR版本是SONAR Platinum 23.2.0.45 :)
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 28, 2017, 05:49:40 PM
非常感谢,在我的android pad上可以显示。
但是我希望大屏幕显示的内容是多轨道的,比如像touchDAW类似
图片这种,我觉得大屏幕能够多轨道这样才会更合理
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 28, 2017, 06:13:56 PM
你好azslow3!
如果我的问题描叙的不好你看不懂的话,我可以给你拍一个视频演示给你看,你可以留邮箱号码给我,我发到你邮箱,因为我们国家上不了youtube
Title: Re: [AZ] OSC Phone
Post by: azslow3 on March 29, 2017, 10:35:52 AM
I am really sorry you have problems with the last version. Please help me to identify it, I still could not reproduce it.
I have tried under Windows 10, Sonar 23.3.0 build 51 (yesterday release) following exactly your video.

Please try the following:
1) disable OSC in the "Options/OSC Configure/Enable" (uncheck it). Still crashing?
2) in the "Options" / "Tweak current configuration..." select "Reset configuration". Still crashing?
3) only in case (2) still crash, install previous release 0.5r3. Also crashing?

Note that preset 1.1 will not work with older versions of AZ Controller. I will have to re-make it with some previous version in case we can not pin the reason other way.

Excuse me for disturbing you with troubleshooting, but that is the only way I can fix the problem.
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 29, 2017, 10:49:42 AM
我马上试试。我大胆的猜想,这个 错误有可能是因为我的操作系统windows10与SONAR是中文版本导致的?
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 29, 2017, 11:00:14 AM
你好!!我刚刚测试了,我把我的中文版本的SONAR卸载,重新安装英文版本的SONAR,那个问题解决了。这个错误是中文SONAR造成的?
Title: Re: [AZ] OSC Phone
Post by: azslow3 on March 29, 2017, 12:05:16 PM
There was several recent fixes in Sonar for bugs in localized versions only. There can be more.
It still can be a bug in AZ Controller. I will try to install Chinese version to reproduce.
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 29, 2017, 12:12:51 PM
 :)非常棒!如果有需要我帮测试的,可以随时联系我,我会非常乐意帮你测试新版本的AZ 控制器,非常期待完善。
Title: Re: [AZ] OSC Phone
Post by: azslow3 on March 29, 2017, 01:35:11 PM
I can reproduce the crash under Chinese version!

I will analyze and eliminate the crash, but please give me some time.

Thank you for reporting and giving good hint how to reproduce!
Title: Re: [AZ] OSC Phone
Post by: azslow3 on March 29, 2017, 02:42:58 PM
The bug is in Sonar for Chinese locale. An attempt to get send pan text when it is centered crash Sonar.

I have modified SPP files (in the first post and FHD) so re-download them. _1_1p1 , for both SPP. TouchOSC layout is not changed.

Note that Sonar Control Surface is not localized. All not ASCII characters are printed as "?". Nothing I can do within AZ Controller, sorry.

Please confirm new presets no longer crash.

I will report the bug to Cakewalk.
Title: Re: [AZ] OSC Phone
Post by: lianganbin on March 29, 2017, 02:58:50 PM
!!!我下载了OSC_Phone_1_1p1.spp,重新安装SONAR中文版,已经可以正常工作了!!!
非常感谢!!谢谢!!
Title: Re: [AZ] OSC Phone
Post by: zgildasz on January 18, 2019, 05:55:10 PM
Hello azslow3, first thanks a lot for your great work, very useful.

I have tried osc/tablet to control sonar (8.5), and modified a lot of things on the main panel of initial "OSCPhones".

There's two things (for the moment...) I try to understand : how to consider midi tracks for mute solo and arm etc ?...

Second : if you know a way to "un-echo" all tracks, as rude solo or rude mute who toggle all mute or solo buttons, I'm curious to know how you proceed.

Thanks for answer, I will probably post my version of OSC panel on of theses days.
Title: Re: [AZ] OSC Phone
Post by: azslow3 on January 18, 2019, 06:10:51 PM
There's two things (for the moment...) I try to understand : how to consider midi tracks for mute solo and arm etc ?...
I am not sure I understand the question. Do you mean you want exclude MIDI tracks from surface operations?
If yes, there are several options. You can ask Sonar so that it expose only Console or Track view strips to surfaces. So hided tracks in the corresponding view are
not present from surface perspective. Or you can use "Skip MIDI tracks" in the "Strip" actions in the AZ Controller preset.
 
Quote
Second : if you know a way to "un-echo" all tracks, as rude solo or rude mute who toggle all mute or solo buttons, I'm curious to know how you proceed.
That does not  exist. Can be implemented if you really want it, but that is not a trivial change.


PS. You mail service for some reason banning notifications from this site.
Title: Re: [AZ] OSC Phone
Post by: zgildasz on January 18, 2019, 06:54:29 PM
1) no it was the contrary, I want to be able ton control all kind of tracks by the surface, and with yoour advices that's now ok 8-)

2) yes that's not implemented, and all I have tested before was not really useful (with AutoHotkey, and "graphic automatisation" of the mouse who go to click on the echo bar tool to activate or desactivate all echoes...).

3) I have not checked the "autorisation for people to mail me" when register, maybe that's it....
Title: Re: [AZ] OSC Phone
Post by: azslow3 on January 18, 2019, 07:11:55 PM
Ok. May be I implement "All echo off" as a function instead of other Rude commands. That is less intrusive.
Feel free to ping me if I do not publish it within a week, I am getting older and periodically forget things  ;)
Title: Re: [AZ] OSC Phone
Post by: zgildasz on January 18, 2019, 07:19:06 PM
Aaaaah that's great !!! By the way if you know a way to un-arm only to replace the rude arm which could sometimes active all tracks arm and is not useful...

Else : is the sends panel works with instrument track ? I have tried different ways but no solution to control it... And I've read that busses can be controlled but I can't...

And... when I try to create a new button push, all is ok except that when I assign OSC it records "/accxyz" whatever I put in the osc editor ("/unmute" in my case)...
Title: Re: [AZ] OSC Phone
Post by: azslow3 on January 18, 2019, 10:22:27 PM
Aaaaah that's great !!! By the way if you know a way to un-arm only to replace the rude arm which could sometimes active all tracks arm and is not useful...
There is "Function" "All" "Tracks Disarm".

Quote
Else : is the sends panel works with instrument track ? I have tried different ways but no solution to control it...
Normally it should, I have just checked in Platinum. Sends are a bit problematic with side chaining, but work in general. May be something was broken in 8.5 days...
But I will re-check later.

Quote
And I've read that busses can be controlled but I can't...
Should be possible. Clicking on the current strip name should generate /cstrip and that in turn should switch between tracks and buses. Again, that was only checked with X2 upwards.

Quote
And... when I try to create a new button push, all is ok except that when I assign OSC it records "/accxyz" whatever I put in the osc editor ("/unmute" in my case)...
Well, that you better check in the editor. If I remember correctly, there is a "name" and there is the OSC command the control send.
Title: Re: [AZ] OSC Phone
Post by: zgildasz on January 19, 2019, 02:06:56 PM
Hello Alexey

1) ok disarm all works

2) ok

3) ok

4)
Quote
Well, that you better check in the editor. If I remember correctly, there is a "name" and there is the OSC command the control send.
well, I've tried again with different config : start from original osc phone 1.1, tried without project in sonar, with exact same name and /name in osc editor etc.. but still this bug who result by "/accxyz" recorded when assigning osc on the hardware page of AZ controller.

Just a precision : the only success time was after fresh install of last AZ version, with the add of a push UNDO button. I have tried after reinstalled last AZ version but no success with my osc adress, still got "/accxyz".

I proceed like that :

After created a push button with touchosc editor, I enter a name, and osc adress /name.
I transfer the file (sync) in the tablet.
In the osc phone file, I create in the option tab, from a new control from hardware control, with the /name and choose pad (sometimes nothing but it doesn't change anything in the result).
In the hardware tab, I find the /name hardware control, I attach it then ((None)) /test : appears in logical control.
I push the /name button ont tablet (I've tried before "attach" operation too)
I assign osc and..... "/accxyz" is the osc adress assigned..... :-*

Edit : tried earlier versions of AZ with clean desinstall, with clean 1.0 and 1.1 spp, with auto osc for automatic address... Still got the f...... Bug.
Title: Re: [AZ] OSC Phone
Post by: zgildasz on January 19, 2019, 03:01:12 PM
Ok, understood!!! That's the software state, who where not on strip....  8) ::)

Edit: no... It works one time but still got the problem with new push buttons... Don't understand.

Edit one more time for the world : well, that's probably because my ewi air controller send midi (bend expression) information in non stop... I have deconnected the ewi and have recorded 8 news command without problem.

Eventually it could be my tablet, the not official rom, wait and see..... At this moment I have to go back to real life 8-)
Title: Re: [AZ] OSC Phone
Post by: azslow3 on January 19, 2019, 11:15:17 PM
Just watch for "Last MIDI event", OSC should also appear there. Check that in the Control Surfaces no MIDI in assigned to AZ Controller.
Note that TouchOSC control send several messages: "control is touched", "control is operated", "control is released". And you need to learn correct one.

If "Last MIDI event" get some strange message, you do not know what it is and do not want to care, assign in to a fake control of "System" type. The message
in not reported then (no "Last MIDI event", no current control switch).
Title: Re: [AZ] OSC Phone
Post by: zgildasz on January 20, 2019, 01:12:16 PM
Yes I have watched last midi event, it show me lot of same (without doing nothing from me) "/accxyz" info received several times.

I have changed the rom of my TF101 tablet, to an ICS android, but the problem is still the same so it doesn't comes from that. I will try what you wrote about another surfaces control, but I remember unplug my nocturn (with original surface software control), then my alphatrack (before on AZ surface software control but now on alphatrack original surface software control). The problem was still there, but I have to do it again cleaner, and with my BCF2000 included.

But I have done like you wrote, create a fake command system and  that's ok now, I can then record new osc command except that there's always "/z" after my osc adress... For example "/button" is osc recorded as "/button/z" ... But it works so...

And like I said, thanks a lot for your precious work and advices.
Title: Re: [AZ] OSC Phone
Post by: zgildasz on January 21, 2019, 05:49:35 PM
Ok, I've understood the /accxyz and also /z mystery !!

That's in the touchosc app options : my "accelerometer (/accxyz)" and my "touch messages (/z)" where both selected... I have tried without and no problem since  8) 8) 8)

Do you know how to send an "all fxs bypass" command, for the moment I'm using a send keyboard command shortcut but because I'm using a toggle and not a push button (to get the info bypassed or not), it should be synchronise with what I have on the sonar screen, so that's not a clean way...

Well I try to modify and adapt your ACT page.... Hard way....
Your config works with one push buttons to select the parameter changed by one slider. I need several sliders, rotary and eventually XY who directly change a pre-ACT-configured parameter...
Title: Re: [AZ] OSC Phone
Post by: azslow3 on January 22, 2019, 11:38:48 AM
Sonar is not REAPER... it has no feedback for commands and many operations are not exposed throw API. So I guess no feedback for "all fx bypass", sorry.
If you need several ACT controls, just define them on a separate page with "ACT R 1", "ACT R 2", etc. You will need to learn them with "ACT Learn" and use AZ ACT Fix utility.
Title: Re: [AZ] OSC Phone
Post by: azslow3 on January 24, 2019, 06:03:55 PM
I have uploaded new version with "All echo off" function.
I have check for monitoring possibility, but it will be "too heavy" for Sonar. So, no feedback if some track has echo on, sorry.
Title: Re: [AZ] OSC Phone
Post by: zgildasz on January 25, 2019, 04:20:18 PM
Great ! Thanks a lot Alexey, I will try it as soon as possible.
Title: Re: [AZ] OSC Phone
Post by: zgildasz on January 25, 2019, 09:50:47 PM
Works perfectly. It's soooo confortable to use it 8)