News:

CWP2Song, public beta.
My  DAW is Reaper
YouTube channel

Main Menu

[jboileau] M-Audio Oxygen Pro 61 Preset

Started by jboileau, February 06, 2022, 08:23:19 PM

Previous topic - Next topic

jboileau

Preset for the M-Audio Oxygen Pro 61

https://www.m-audio.com/oxygen-pro-61

Since none of the DAW presets in the Oxygen Pro 61 controller would worked as is, I modified the bitwig preset and made one that works with AZ Controller. Specifically, the knobs (rotaries) didn't work as Mackie controls so I changed them to CCs. You must use the M-Audio Oxygen Pro 61 Preset Editor to load the preset in the UserDaw slot on your Oxygen Pro 61 controller for this AZ Controller plugin preset to work as expected. I didn't find a way to make the UserDaw the default DAW preset, you will have to change to it at every power on of your Oxygen Pro 61 controller unfortunately.

Features


  • Faders control track or bus faders depending on WAI focus
  • Knobs control pan and work very well with the knob center being the center of the pan in Cakewalk (nice!)
  • Rec, Mute and Solo buttons work as expected for tracks and busses
  • Select button: I have mapped it to input echo for tracks and it toggles waveform preview for busses by default
  • Bank buttons moves the WAI 8 tracks or busses focus by -8 or +8
  • Encoder knob moves the WAI 8 tracks or busses focus by -1 or +1 (nice!)
  • Back button is mapped to undo (quicker than the shift-Undo pad, but that works too)
  • Fader 9 controls both left and right of the first output strip (not the master, just the output for overall volume without affecting the mix)
  • The two buttons on the right of the pads control the WAI focus. The top one puts the focus on the tracks and the bottom one on the busses
  • The buttons v and ^ (shift-<< and shift->>) also changes the focus to tracks and busses (until I find better use for them!)
  • Stop, play, record, <<, >> and loop buttons work as expected
  • Shift Pad 15 (view) didn't do nothing, so I mapped it to show/hide the Inspector (that is done in the controller's preset)

Installation


  • Download and install latest AZ Controller plugin
  • Connect and power up your Oxygen Pro 61 controller
  • Download the attachments and rename 'Cakewalk.OxygenPro61DawPreset.bin' to 'Cakewalk.OxygenPro61DawPreset'
  • Using the M-Audio Oxygen Pro 61 Preset Editor, load 'Cakewalk.OxygenPro61DawPreset' and send it to your controller
  • Make sure the DAW preset 'Cakwalk' is selected on your controller, it's the last preset in the list
  • Start Cakewalk and load a Project
  • In 'Preference / Control Surfaces', add an AZ Controller and use 'MIDIIN3 (Oxygen Pro 61)' for ports
  • Use 'Utilities / Cakewalk Plugin Manager' and import 'M-Audio Oxygen Pro 61.spp' for AZ Controller
  • Use 'Utilities / AZ Controller - 1' and select preset 'M-Audio Oxygen Pro 61'

As I use it, I may change some assignements and/or add new ones. I will update this post if I do. Comments on what could be improved are welcomed.

Enjoy!