AZ Controller plug-in for Cakewalk SONAR > Bugtracker
Bus to Bus Sends not working
(1/1)
norfolkmastering:
I cannot get the monitoring outputs of any Bus to Bus Sends working.
So I made a simple preset which has:
Track 1 to Bus 1 Send enable - this works
Track 1 to Bus 2 Send enable - this works
Bus 1 to Bus 2 Send enable - this is not working
I know that the Bus to Bus Send function was working on some previous versions.
The simple preset TestAZ.spp is attached.
azslow3:
I have checked with X2, and it works. I can't check the latest CBB at the moment (Bandlab Assistant refuse to start...).
But in the preset you attach, Bus 1 to Bus 2 control is for the SECOND send from Bus 1 (send number 1, counted from 0). I you sure you have 2 sends on Bus 1 (and testing correct one)?
Note that traditionally Cakewalk (Sonar+) mess with sends where there are some plug-ins with side-chains. Please check on clean project without such plug-ins.
EDIT: I have checked with CbB 2021.4, bus send enable controlling works as expected for me
norfolkmastering:
Hello Alexey
You were correct!
I misunderstood the numbering system on sends.
I thought that the send number related to the absolute bus number but now I understand it is the position of the send on the track or bus strip.
Sorry for the confusion.
Function is working!
Regards
Robert
Navigation
[0] Message Index
Go to full version