Author Topic: Sibiac: Zampler  (Read 388 times)

Offline azslow3

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
Sibiac: Zampler
« on: November 05, 2018, 05:51:26 PM »
Zampler is SFZ/REX based sampler from Sinapse Audio. Can be download for free, but most sound packs are commercial. https://www.zampler.de/

By itself, Zampler is no accessible. But most parameters are exposed as automations. Sibiac overlay can be used for preset management, mod matrix definition and not exposed by automations parameters.

Requirements
You will need the latest NVDA (I was working with 2018.3) and the latest Sibiac add-ons (there are 2, one for OCR) installed. Do not forget to check the screen settings, most important the magnification factor which should be 100%. http://www.azslow.com/index.php?topic=428.0

Operations
  • Main tab
    • Current patch. Arrows to change, enter opens accessible menu
    • Bank and patch load/save buttons
    • Currently loaded SFZ/REX, enter to load from file.
    • Polyphony and bend settings, change by arrows
  • Mod matrix.
    • In the chooser, select required slot. Current parameters auditioned. The tab inside that slot
    • Source and Destination open accessible menu by enter
    • Amount can be changed by arrows. You can keep the arrow pressed for a while for fast changes
  • Arpeggiator. Loading patter with Enter. Editing is not currently supported, but can be without big effort.

The only not automated parameter I have observed was Filter type. So it is covered by Sibiac overlay, use arrows to change.

Let me know if something else can not be done with parameters nor Sibiac.
 

Offline azslow3

  • Administrator
  • Hero Member
  • *****
  • Posts: 1144
Re: Sibiac: Zampler
« Reply #1 on: November 05, 2018, 05:51:35 PM »
.