Recent Posts

Pages: [1] 2 3 ... 10
1
Presets / Re: [AZ] OSC Phone
« Last post by zgildasz on Yesterday at 01:12:16 PM »
Yes I have watched last midi event, it show me lot of same (without doing nothing from me) "/accxyz" info received several times.

I have changed the rom of my TF101 tablet, to an ICS android, but the problem is still the same so it doesn't comes from that. I will try what you wrote about another surfaces control, but I remember unplug my nocturn (with original surface software control), then my alphatrack (before on AZ surface software control but now on alphatrack original surface software control). The problem was still there, but I have to do it again cleaner, and with my BCF2000 included.

But I have done like you wrote, create a fake command system and  that's ok now, I can then record new osc command except that there's always "/z" after my osc adress... For example "/button" is osc recorded as "/button/z" ... But it works so...

Do you know how to send an "all fxs bypass" command, for the moment I do it with a send keyboard command shortcut but because I'm using a toggle and not a push button (to get the info bypassed or not), it should be synchronise with what I have on the sonar screen, so that's not a clean way...

I also wish to make if possible toggles buttons, and when I push the first one then it becomes "on", I push then the second one which becomes "on" with the last one "on" button becomes "off"... And I want it with 8 buttons, and always just one on "on", others on "off. Wonder if that's possible, and because it sends keyboard shortcuts it could be hard to get something clean...

I also got difficulties to adapt from your oscphones1.1 your tracks panel from the second page. But we will see that after...

And like I said, thanks a lot for your precious work and advices.
2
Presets / Re: [AZ] OSC Phone
« Last post by azslow3 on January 19, 2019, 11:15:17 PM »
Just watch for "Last MIDI event", OSC should also appear there. Check that in the Control Surfaces no MIDI in assigned to AZ Controller.
Note that TouchOSC control send several messages: "control is touched", "control is operated", "control is released". And you need to learn correct one.

If "Last MIDI event" get some strange message, you do not know what it is and do not want to care, assign in to a fake control of "System" type. The message
in not reported then (no "Last MIDI event", no current control switch).
3
Presets / Re: [AZ] OSC Phone
« Last post by zgildasz on January 19, 2019, 03:01:12 PM »
Ok, understood!!! That's the software state, who where not on strip....  8) ::)

Edit: no... It works one time but still got the problem with new push buttons... Don't understand.

Edit one more time for the world : well, that's probably because my ewi air controller send midi (bend expression) information in non stop... I have deconnected the ewi and have recorded 8 news command without problem.

Eventually it could be my tablet, the not official rom, wait and see..... At this moment I have to go back to real life 8-)
4
Presets / Re: [AZ] OSC Phone
« Last post by zgildasz on January 19, 2019, 02:06:56 PM »
Hello Alexey

1) ok disarm all works

2) ok

3) ok

4)
Quote
Well, that you better check in the editor. If I remember correctly, there is a "name" and there is the OSC command the control send.
well, I've tried again with different config : start from original osc phone 1.1, tried without project in sonar, with exact same name and /name in osc editor etc.. but still this bug who result by "/accxyz" recorded when assigning osc on the hardware page of AZ controller.

Just a precision : the only success time was after fresh install of last AZ version, with the add of a push UNDO button. I have tried after reinstalled last AZ version but no success with my osc adress, still got "/accxyz".

I proceed like that :

After created a push button with touchosc editor, I enter a name, and osc adress /name.
I transfer the file (sync) in the tablet.
In the osc phone file, I create in the option tab, from a new control from hardware control, with the /name and choose pad (sometimes nothing but it doesn't change anything in the result).
In the hardware tab, I find the /name hardware control, I attach it then ((None)) /test : appears in logical control.
I push the /name button ont tablet (I've tried before "attach" operation too)
I assign osc and..... "/accxyz" is the osc adress assigned..... :-*

Edit : tried earlier versions of AZ with clean desinstall, with clean 1.0 and 1.1 spp, with auto osc for automatic address... Still got the f...... Bug.
5
Presets / Re: [AZ] OSC Phone
« Last post by azslow3 on January 18, 2019, 10:22:27 PM »
Aaaaah that's great !!! By the way if you know a way to un-arm only to replace the rude arm which could sometimes active all tracks arm and is not useful...
There is "Function" "All" "Tracks Disarm".

Quote
Else : is the sends panel works with instrument track ? I have tried different ways but no solution to control it...
Normally it should, I have just checked in Platinum. Sends are a bit problematic with side chaining, but work in general. May be something was broken in 8.5 days...
But I will re-check later.

Quote
And I've read that busses can be controlled but I can't...
Should be possible. Clicking on the current strip name should generate /cstrip and that in turn should switch between tracks and buses. Again, that was only checked with X2 upwards.

Quote
And... when I try to create a new button push, all is ok except that when I assign OSC it records "/accxyz" whatever I put in the osc editor ("/unmute" in my case)...
Well, that you better check in the editor. If I remember correctly, there is a "name" and there is the OSC command the control send.
6
Presets / Re: [AZ] OSC Phone
« Last post by zgildasz on January 18, 2019, 07:19:06 PM »
Aaaaah that's great !!! By the way if you know a way to un-arm only to replace the rude arm which could sometimes active all tracks arm and is not useful...

Else : is the sends panel works with instrument track ? I have tried different ways but no solution to control it... And I've read that busses can be controlled but I can't...

And... when I try to create a new button push, all is ok except that when I assign OSC it records "/accxyz" whatever I put in the osc editor ("/unmute" in my case)...
7
Presets / Re: [AZ] OSC Phone
« Last post by azslow3 on January 18, 2019, 07:11:55 PM »
Ok. May be I implement "All echo off" as a function instead of other Rude commands. That is less intrusive.
Feel free to ping me if I do not publish it within a week, I am getting older and periodically forget things  ;)
8
Presets / Re: [AZ] OSC Phone
« Last post by zgildasz on January 18, 2019, 06:54:29 PM »
1) no it was the contrary, I want to be able ton control all kind of tracks by the surface, and with yoour advices that's now ok 8-)

2) yes that's not implemented, and all I have tested before was not really useful (with AutoHotkey, and "graphic automatisation" of the mouse who go to click on the echo bar tool to activate or desactivate all echoes...).

3) I have not checked the "autorisation for people to mail me" when register, maybe that's it....
9
Presets / Re: [AZ] OSC Phone
« Last post by azslow3 on January 18, 2019, 06:10:51 PM »
There's two things (for the moment...) I try to understand : how to consider midi tracks for mute solo and arm etc ?...
I am not sure I understand the question. Do you mean you want exclude MIDI tracks from surface operations?
If yes, there are several options. You can ask Sonar so that it expose only Console or Track view strips to surfaces. So hided tracks in the corresponding view are
not present from surface perspective. Or you can use "Skip MIDI tracks" in the "Strip" actions in the AZ Controller preset.
 
Quote
Second : if you know a way to "un-echo" all tracks, as rude solo or rude mute who toggle all mute or solo buttons, I'm curious to know how you proceed.
That does not  exist. Can be implemented if you really want it, but that is not a trivial change.


PS. You mail service for some reason banning notifications from this site.
10
Presets / Re: [AZ] OSC Phone
« Last post by zgildasz on January 18, 2019, 05:55:10 PM »
Hello azslow3, first thanks a lot for your great work, very useful.

I have tried osc/tablet to control sonar (8.5), and modified a lot of things on the main panel of initial "OSCPhones".

There's two things (for the moment...) I try to understand : how to consider midi tracks for mute solo and arm etc ?...

Second : if you know a way to "un-echo" all tracks, as rude solo or rude mute who toggle all mute or solo buttons, I'm curious to know how you proceed.

Thanks for answer, I will probably post my version of OSC panel on of theses days.
Pages: [1] 2 3 ... 10