[Bassman] Preset for NovationLaunchControl XL II (Finished!!!)

[Bassman]

HI:)     

Finished it. Now just "Cosmetics/Changes/Improvements" will be done in future.

Please look at "Latest Changes" for new things/changes!

IMPORTANT: For not to reset the Controller when playback Stop:
In the preferences-->Midi-->Instruments-->Port/All Channels of the Controller-->Define--> Import LaunchControlXL.ins
Now this Controller is not resetted on Settings--> Project-->More Midi-->"Reset Controller when playback stop" enabled.


Preset for the Novation LaunchControl XL MKII. All commands are described in the PDF.

More than 600 Parameter can be controlled at the moment, without ACT!

Uses 4 Userpresets from Launch control. Upload it with the editor to the Controller (Preset 1-4), to switch between the presets it needs to enable Sysx forwarding in the Cakewalk Settings!

Newest Files: (02-23-2021)

https://1drv.ms/u/s!Al2mKojzOW0Mp6cltmQ69wjk2fKl0A?e=HzcDaw

Please give some feedback on this huge preset. It will take time to try all out!

Have fun;)
Bassman.

[Bassman]

Hi:)

Update 01.08.2021

Uploaded Installation Guide:

https://1drv.ms/u/s!Al2mKojzOW0Mp6cltmQ69wjk2fKl0A?e=HzcDaw

Greetz;)
Bassman.

[Bassman]

HI:)

Installation Guide and a very short Starting Description is Online.

I've listed the used Shortcuts too in the Doc/Pdf.

https://1drv.ms/u/s!Al2mKojzOW0Mp6cltmQ69wjk2fKl0A?e=HzcDaw

Greetings;)
Bassman

[azslow3]

Huge work man... I can just judge by AZ Display and preset itself

One comment so. I have notice some "blinking" on Display, so I have checked and you reset some monitors from themselves. So effectively you are updating all the time, even when nothing was changed (I guess some SysEx are also sent continuously). Was that designed on purpose?

[Bassman]

HI:)

Just seen that you wrote:)

I know I resetted some monitors by itsself. Have to find and change them! That was my beginning to do Display and sometimes I realized that it's not working and resetted them by themselve. Later on I realized that they are not immediately updated and forgot some resets.....just tell me if you find some:)

Thanks;)
Heinz.

[Bassman]

Hi:)

Newest Preset File 01-27-2021: "Preset AZC - Nov-2.0-LC 01-27-2021.spp"

https://1drv.ms/u/s!Al2mKojzOW0Mp6cltmQ69wjk2fKl0A?e=3N0JGM

Changes/Additions:

Send Select Button Up (WAIDown) LONG_PRESS --> Reset to Preset 1 Bank 1 from everywhere.

Send Select Button Up (WAIDown) DOUBLE_PRESS --> WAI to Track

Send Select Button Down (WAIUp) DOUBLE_PRESS --> WAI to Bus

Rotor 1 in Normal Mode Bank 1 Preset 1 is now "Snap Settings", with CTRL Gain. Happens too often that you accidentically change Gain.

Added Rotor 1 Display for Normal Mode  and pressed CTRL.

Changed Display for Normal Mode Preset 1 Bank 1: Numbers above 99 were not visible.
Added Space between Numbers and Parameter Names.

Track Select Left (CTRL) Double_Press is now "Open Synth of selcected Track" -> ACT Mode
Track Select Left (CTRL) Double_Press changed Display of ACT Mode/Normal Mode -> Reset Display correctly

Track Select Left (CTRL) LONG_PRESS is now PRV Mode (not SHIFT+CTRL anymore, so we have CTRL+SHIFT for other things)
Track Select Left (CTRL) LONG_PRESS --> Display PRV Mode --> Light Red Blink CTRL Button.

I thought the Preset is finished, but it goes on....

Greetz;)
Bassman.

[Bassman]

HI:)

In OneDrive now is a file "Latest Changes" to see latest changes:)

==================== Changes 02-23 ====================

First Button should work in Normal, Edit, Record and Level Mode with Short Press, Double Press and Long Press
Normal Mode SP Solo, DP Goto From, LP Goto Thru, SHIFT Insert Marker
Edit, Record and Level Mode SP Goto Position, DP Goto From, LP Goto Thru, SHIFT Nothing yet

Now all other Buttons to go....

Midi Mode (Long Press WAI Down) does now work correctly with LED and Display
Record Mode (Long Press WAI Up) does now work correctly with LED and Display

Corrected LEDs (Blink) with Transport Buttons.....

Refused some Buttons to work in some Modes so you first have to leave the mode to work on!

==================== Changes 02-21 ====================

Adding Double Click Actions to the Buttons, no button ready yet,
latest Preset File with old Buttons is from 02-19-2021.

Greetz;)
Bassman.