Author Topic: [Bassman] Preset for NovationLaunchControl XL II (Finished!!!)  (Read 762 times)

Offline Bassman

  • Full Member
  • ***
  • Posts: 146
HI:)     

Finished it. Now just "Cosmetics/Changes/Improvements" will be done in future.

IMPORTANT: For not to reset the Controller when playback Stop:
In the preferences-->Midi-->Instruments-->Port/All Channels of the Controller-->Define--> Import LaunchControlXL.ins
Now this Controller is not resetted on Settings--> Project-->More Midi-->"Reset Controller when playback stop" enabled.


Preset for the Novation LaunchControl XL MKII. All commands are described in the PDF.

More than 600 Parameter can be controlled at the moment, without ACT!

Uses 4 Userpresets from Launch control. Upload it with the editor to the Controller (Preset 1-4), to switch between the presets it needs to enable Sysx forwarding in the Cakewalk Settings!

Newest Files: (01-27-2021)

https://1drv.ms/u/s!Al2mKojzOW0Mp6cltmQ69wjk2fKl0A?e=HzcDaw

Please give some feedback on this huge preset. It will take time to try all out!

Have fun;)
Bassman.


« Last Edit: Yesterday at 06:39:45 PM by Bassman »

Offline Bassman

  • Full Member
  • ***
  • Posts: 146
Re: [Bassman] Preset for Novation Launch Control XL MKII
« Reply #1 on: August 18, 2020, 02:47:51 PM »
Hi:)

Update 01.08.2021

Uploaded Installation Guide:

https://1drv.ms/u/s!Al2mKojzOW0Mp6cltmQ69wjk2fKl0A?e=HzcDaw

Greetz;)
Bassman.
« Last Edit: January 08, 2021, 06:05:03 PM by Bassman »

Offline Bassman

  • Full Member
  • ***
  • Posts: 146
Re: [Bassman] Preset for NovationLaunchControl XL II (Finished!!!)
« Reply #2 on: January 08, 2021, 05:51:12 PM »
HI:)

Installation Guide and a very short Starting Description is Online.

I've listed the used Shortcuts too in the Doc/Pdf.

https://1drv.ms/u/s!Al2mKojzOW0Mp6cltmQ69wjk2fKl0A?e=HzcDaw

Greetings;)
Bassman

Offline azslow3

  • Administrator
  • Hero Member
  • *****
  • Posts: 1397
Re: [Bassman] Preset for NovationLaunchControl XL II (Finished!!!)
« Reply #3 on: January 08, 2021, 11:59:09 PM »
Huge work man... I can just judge by AZ Display and preset itself :)

One comment so. I have notice some "blinking" on Display, so I have checked and you reset some monitors from themselves. So effectively you are updating all the time, even when nothing was changed (I guess some SysEx are also sent continuously). Was that designed on purpose?

Offline Bassman

  • Full Member
  • ***
  • Posts: 146
Re: [Bassman] Preset for NovationLaunchControl XL II (Finished!!!)
« Reply #4 on: Yesterday at 06:22:01 PM »
HI:)

Just seen that you wrote:)

I know I resetted some monitors by itsself. Have to find and change them! That was my beginning to do Display and sometimes I realized that it's not working and resetted them by themselve. Later on I realized that they are not immediately updated and forgot some resets.....just tell me if you find some:)

Thanks;)
Heinz.

Offline Bassman

  • Full Member
  • ***
  • Posts: 146
Re: [Bassman] Preset for NovationLaunchControl XL II (Finished!!!)
« Reply #5 on: Yesterday at 06:39:21 PM »
Hi:)

Newest Preset File 01-27-2021: "Preset AZC - Nov-2.0-LC 01-27-2021.spp"

https://1drv.ms/u/s!Al2mKojzOW0Mp6cltmQ69wjk2fKl0A?e=3N0JGM

Changes/Additions:

Send Select Button Up (WAIDown) LONG_PRESS --> Reset to Preset 1 Bank 1 from everywhere.

Send Select Button Up (WAIDown) DOUBLE_PRESS --> WAI to Track

Send Select Button Down (WAIUp) DOUBLE_PRESS --> WAI to Bus

Rotor 1 in Normal Mode Bank 1 Preset 1 is now "Snap Settings", with CTRL Gain. Happens too often that you accidentically change Gain.

Added Rotor 1 Display for Normal Mode  and pressed CTRL.

Changed Display for Normal Mode Preset 1 Bank 1: Numbers above 99 were not visible.
Added Space between Numbers and Parameter Names.

Track Select Left (CTRL) Double_Press is now "Open Synth of selcected Track" -> ACT Mode
Track Select Left (CTRL) Double_Press changed Display of ACT Mode/Normal Mode -> Reset Display correctly

Track Select Left (CTRL) LONG_PRESS is now PRV Mode (not SHIFT+CTRL anymore, so we have CTRL+SHIFT for other things)
Track Select Left (CTRL) LONG_PRESS --> Display PRV Mode --> Light Red Blink CTRL Button.

I thought the Preset is finished, but it goes on....

Greetz;)
Bassman.