Author Topic: [AZ] Presets which work without control surface  (Read 4792 times)

Offline azslow3

  • Administrator
  • Hero Member
  • *****
  • Posts: 1419
[AZ] Presets which work without control surface
« on: May 23, 2016, 06:27:59 PM »
AZ Controller can be used without hardware to add automatic actions. In this thread I am going to publish interesting examples of such use cases.

To use attached presets:
1) Follow Generic installation instructions
2) Instantiate AZ Controller in Sonar Preferences/Control Surfaces with Input and Output set to "None" (important to avoid clash with your MIDI controllers!)
3) select corresponding preset in the AZ Controller preferences window

Rehearsal
(v0.5r0b314)
Originated from this thread on CW forum

What it does:
When recording is stopped, solo record armed tracks and start playback. After that playback is stopped, un-solo armed tracks.

That behavior can be temporarily avoided by setting "Rehearsal" to "Inactive" in the AZ Controller preferences window ("Overview" Tab).

Stop On Marker
Originated from this thread on CW forum

What it does:
During playback or recording, stop when transport reach one of predefined markers.
The names of such markers can be defined changing/appending "_StopMarkers" set in the Options tab. In uploaded preset, "Stop1" and "Stop2".
The transport is stopped with "Stop with Now Marker" command. Can be modified in the Logic tab.

Note there is some delay between the marker and stop (~0.1s). Control surfaces was never through to be sample accurate. 
« Last Edit: September 12, 2019, 09:56:04 AM by azslow3 »